Dimatteo Bank Sinker Mold with 5 Cavities and 1,2.3

How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when heating and pouring lead. 2. Put scrap lead into

Dimatteo Pyramid Sinker Mold with 5 Cavities and 30g

Rs-6-S2, Do-It Corporatio : Sports & Outdoors

Dimatteo Bank Sinker Mold with 5 Cavities and 4,8,12

DO-IT Bank Sinker Mold BK-1-24 D3272 : Sports & Outdoors

Dimatteo Bank Sinker Mold with 5 Cavities and 1,2.3

6/8/10pc Drop Shot Casting Sinkers Kit Hexagonal Shape Lead

How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when heating and pouring lead. 2. Put scrap lead into

Pyramid Sinker Mold with 5 Cavities and 30g 40g 50g 60g 80g for Freshwater and Fishing Salfwater, 30 pcs 18mm S/S Eyelets Includes

How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when heating and pouring lead. 2. Put scrap lead into

Dimatteo Bank Sinker Mold with 3 Cavities and 16,20,30-Ounce

How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when heating and pouring lead. 2. Put scrap lead into saucepan and heat until molten (lead will normally melt at 650 degrees). 3. Once lead is molten use a cooking spoon to take away any impurities that have risen to the top. 4.

Dimatteo Round Sinker Mold with 7 Cavities and 1/4,1/2,1,2,3,4,6-Ounce,Without Handle

6/8/10pc Drop Shot Casting Sinkers Kit Hexagonal Shape Lead Sinker

32 pcs Fishing Pyramid Sinker Mold Kits 1oz 1.5oz Ghana

Fishing Sinker Mould

Dimatteo 32 pcs Fishing Pyramid Sinker Mold Kits 1oz 1.5oz 2oz 2.5oz 3oz 5 Cavities

Adygil Bean Sinker Mold with 5 Cavities and 1-Ounce, Without Handle : Sports & Outdoors

Round Sinker Mold With 5 Cavities and 3.5-Ounce How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when heating and pouring lead. 2. Put scrap lead into saucepan and heat until molten (lead will normally melt at 650 degrees). 3. Once lead is molten use a cooking spoon to take away any impurities that have risen to the top. 4. Take your coat hanger wire (wire is only used when making sinkers that require a hole in the centre) and place within the mould.

Adygil Round Sinker Mold with 5 Cavities and 3.5-Ounce,without Handle